Panasonic KX-FP155AL - Manual (Page 66)

Features Summary
66
Code Feature & Display Settings How the unit operates
(The default setting is in bold type.)
If you hear slow beeps, erase the
recorded messages (p. 52, 58).
The beeps will stop.
#43
ON
OFF
■
For KX-FP155 only:
Setting the recording time alert
To alert you with beeps when there
is less than 60 seconds of
remaining recording time.
REC. TIME ALERT
=OFF [±]
Advanced features (cont.) !
How to set menu options
Programming table (cont.)
Note:
●
Step 3 may be slightly different depending on the
feature.
●
See page 61 for more details.
1. Press p .
2. Press ( or ) until the following is
displayed:
then press w and press ( or )
until the desired feature is displayed.
ADVANCED MODE
PRESS SET
3. Press + or - until the desired setting is
displayed.
4. Press w .
5. Press p .
#41
Changing the fax activation code
If you use an extension telephone
and wish to use it to receive a fax,
activate this feature, and enter the
code (p. 44).
●
This code is also used to receive
a voice message and a fax in the
same call (p. 43)(KX-FP151 only).
FAX ACTIVATION
=ON [±]
ON /
CODE= ? 9
OFF
1. Follow steps 1 and 2 on page 64.
2. Press + or - to select “ ON”.
3. Press w .
4. Enter your code from 2 to 4 digits,
using 0–9 and
: .
5. Press w .
6. Press p .
●
Do not enter “ 0000”.
If you hear slow beeps, press
L M and listen to
recorded messages (p. 52). The
beeps will stop.
#42
■
For KX-FP155 only:
Setting the message alert
To alert you with beeps when a
new voice message is recorded.
MESSAGE ALERT
=OFF [±]
ON
OFF