Panasonic KX-FM220 - Manual (Page 66)

66
1 2 3
4 5 6
7 8 9
0
Changing the recording time for the ANS/FAX
greeting message
You can choose either 16 seconds or 60 seconds of recording time.
1 Press (MENU) .
Display:
2 Press K , then E D .
3 Press (START/COPY/SET) .
4 Press or to select the desired setting.
5 Press (START/COPY/SET) .
6 Press (MENU) .
MODE=16s [ Ÿÿ ]
GREETING TIME
SYSTEM SET UP
(MENU) Dial keypad
(START/COPY/SET)
Note:
¡ If you change the greeting message time to
60 seconds, we recommend that you inform
the caller in the ANS/FAX greeting message
to press
* 9 before starting fax transmission.
¡ If you change the greeting message time to
16 seconds from 60 seconds, your recorded
ANS/FAX greeting message will be deleted.
Re-record a greeting message (see page 43).
1 2 3
4 5 6
7 8 9
0
Setting the ICM monitor
When a call is received with the answering device, the incoming message will be heard from the speaker
during the call. If you do not wish the message to be heard by other persons who share your unit, set this
feature to OFF.
1 Press (MENU) .
Display:
2 Press K , then F G .
3 Press (START/COPY/SET) .
4 Press or to select “OFF”.
¡ If this feature is required, select “ON”.
5 Press (START/COPY/SET) .
6 Press (MENU) .
MODE=OFF [ Ÿÿ ]
MODE=ON [ Ÿÿ ]
ICM MONITOR
SYSTEM SET UP
(MENU) Dial keypad
(START/COPY/SET)