Panasonic LSQT0676A - Manual (Page 57)

57
Press to select “TV
MODE,” and press SET
repeatedly for
mode.
(See below.)
2
4:3 Pan & Scan (Factory preset) :
Wide-screen video data is played in
Pan & Scan style (left and right of screen
is trimmed.)
• Video data not formatted in Pan & Scan
will play in letterbox style.
4:3 Letterbox :
Wide-screen video data is played in
Letterbox style (top and bottom of screen
has black margin).
16:9 :
Set “16:9” when using Wide-screen TV.
Press ACTION
to exit this mode.
3
*Important: If a remote control button does not work when pressed,
press the DVD button on the remote and try the button again.
[Letterbox] TV Mode
Example
DV
D
Operation
[Pan & Scan (Factory preset)]
Test Signal Setup
1
This feature assists in the setting of
OUTPUT BALANCE. Starting with (L) front
speaker, a test sound is output in clockwise
order. While the test signal is output, adjust
the output of the center speaker and
Surround speaker (R/L).
(See “OUTPUT BALANCE.” P. 56.)
Press
to select “TEST
SIGNAL,” and
press
SET.
(See below.)
3
Press ACTION four times to exit.
2
No sound will come from the subwoofer.
Adjust as desired when playing a disc.
While the TEST SIGNAL is output, if the
setting change in the OUTPUT BALANCE (p.
56) is under 2 seconds, the output will switch
to the next speaker. The speaker name from
which the TEST SIGNAL is currently being
output is displayed.
(Example; "TEST SIGNAL : CENTER")
OUTPUT BALANCE
SELECT :
SET : SET
END : ACT I ON
CENTER : 0dB
SURROUND(R) : 0dB
SURROUND(L) : 0dB
SUBWOOFER : 0dB
TEST SIGNAL TEST SIGNAL : OFF : OFF
Still Mode
1
Press
to select “STILL MODE,”
and
press
SET repeatedly
for mode. (See below.)
2
AUTO: “FIELD” (Field still) or “FRAME” (Frame still) is
automatically selected during the still mode.
(Factory preset)
FIELD: “FIELD” (Field still) is always selected.
This setting will reduce jitter when compared
with “AUTO” on some discs.
FRAME: “FRAME” (Frame still) is always selected.
Some texts and fine patterns will be seen clearly
when compared with “AUTO” on some discs.
TV Mode
1
Set the screen display style for wide-screen video
material playback.
Set to reduce jitter in a displayed still picture or a motion
picture.
3 Press ACTION
to exit this mode.
DVD MAIN MENU
SELECT :
SET : SET
END : ACT I ON
D I SC LANGUAGES
AUDIO OUTPUT
ST I T I L L L L MODE MODE : AUTO : AUTO
TV MODE : 4 : 3 L e t t e r b o x
P A R E N T A L L O C K : L E V E L 8
Press ACTION
to display DVD MAIN MENU.
Press ACTION
to display DVD MAIN MENU.
CENTER
FRONT(R)
SUBWOOFER
FRONT(L)
Listening
position
SURROUND(R) SURROUND(L)
B1
C1
FRONT(L) CENTER FRONT(R) OFF
SURROUND(L) SURROUND(R)
2sec 2sec
2sec
2sec
2sec
<Speaker Position>
DVD MAIN MENU
SELECT :
SET : SET
END : ACT I ON
D I SC LANGUAGES
AUDIO OUTPUT
ST I L L MODE
: AUTO
TV MODE : 4 : 3 L e t t e r b o x
P A R E N T A L L O C K : L E V E L 8
Do steps 1~2 of “Output
Balance Setup” on page 56.
2 D4763S P36-60 (030512 –§”Ф•П•X2nd).p65 2003/05/14, 13:47 57