Panasonic KX-FPC165 - Manual (Page 57)

57
Receiving Faxes
Pager call - when the unit receives a fax or !
voice message !
This feature allows your unit to call your pager when your unit receives a fax document or an
incoming voice message.
1 Press .
Display:
2 Press , then .
3 Press or to select “ON”.
● If this feature is not required, select “OFF”.
4 Press .
5 Enter your pager number up to 30 digits.
Example:
6 Press .
7 Enter your pager access code up to 10 digits
if required.
Example:
8 Press .
● The default code 07734 will show “Hello!”
on your pager.
● If you want to change this message, enter
your message up to 30 digits.
9 Press .
● The unit will dial the stored number.
PAGER TEST
SET
MSG.=07734
SET
PIN=12345678
PIN=
SET
NO.=12025551234
NO.=
SET
PAGER CALL
MODE=ON
[±]
PAGER CALL
MODE=OFF
[±]
7 0
SYSTEM SET UP
PRESS NAVI.[
I H ]
MENU
SET MENU
DIGITAL SP-PHONE
Note:
● If you have subscribed to a Caller ID service,
instead of the message you entered in
step 8, your pager will display the caller’s
telephone number, followed by “11” or “22”.
11: When your unit receives a voice message.
22: When your unit receives a fax document.
● If you have not entered a message in step 8,
your pager will only display “11” or “22”.
10 Check that your pager received
the pager test call.
11 Press . DIGITAL SP-PHONE