Precision Power PRECISIONPOWER DEQ-230 - Manual (Page 4)

3
The DEQ-230’s detachable control panel design greatly simplifies system tuning. It
allows real time adjustment of system equalization from the front seat or outside the
vehicle. In order to operate the DEQ-230 in this mode, simply remove the Allen head screw
(located to the right of the thumb notch on the front bezel) that holds the main control panel
to the docking bay, and carefully remove the main control panel. You will notice that it is
connected to the docking bay via a short eight conductor phone cord. Make sure that the
power is off! Remove the control panel, disconnect the short cord at both ends and then
replace it with the 20 ft. cable (supplied). After plugging the control panel into the docking
bay, turn power back on, and begin your pink noise analysis, or make final adjustments to
sound quality from the front seat.