Precision Power PRECISIONPOWER DEQ-230 User Manual
Page 5
4
NOTE: Before beginning, disconnect the negative (-) terminal of the battery prior to
working on the positive (+) terminal to prevent an electrical short to ground. This is
important, unless you want to spend the rest of your life with a nickname like "Sparky" or
"Smokey." Reconnect the negative terminal only after all connections have been made.
To prevent damage to the equalizer while driving, mount it in a secure place. Choosing
the appropriate location will depend upon your vehicle and the complexity of your system
design. Typical mounting locations include the trunk and passenger compartment (floor or
under seat). Never mount the equalizer in a location that would subject it to immersion or
exposure to water.
Once a location has been chosen, securely mount the DEQ-230 with four mounting
screws. Be Careful! Inspect the area underneath to be sure you are not drilling into
wires, brake or fuel lines, etc. that could be damaged by the drill bit or screws.