Parameters, Show ip address, Operation mode – Panasonic KX-NT700 User Manual
Page 46: Basic settings, Language
Parameters
When programming the unit from the front panel, the current setting is indicated on the display by "ü".
Show IP Address
Description
Available Settings
Default Setting
Allows you to confirm the unit’s IP address.
To change the IP address, see page 24.
—
192.168.0.2
Operation Mode
Description
Available Settings
Default Setting
Determines the mode used to make and receive IP calls.
•
If this setting is changed, the unit must be restarted
before the new setting becomes effective (see page 43).
IP-PBX
Peer to Peer
IP-PBX
Basic Settings
Language
Description
Available Settings
Default Setting
Determines the display language.
Use the following procedure to change the language.
1.
Press [MENU].
2.
Press [ ] 10 times.
3.
Press [ENTER] two times.
4.
Press [ ] or [ ] repeatedly to select the desired
language.
5.
Press [ENTER].
6.
Press [MENU].
English (US)
Español
Français
Français (C)
Italiano
Nederlands
Português
Deutsch
English (UK)
English (US)
46
Operating Instructions
Document Version 2008/10
Programming the Unit