Panasonic AV-HS300G - Manual (Page 13)

39
3. Setup
Setting the gateway
1 On the SETUP menu, turn [F1] to display the GW (Gateway) menu.
2 Turn [F] to select the setting location. An asterisk ( ) appears at the setting location.
3 Turn [F3] to set the number, and press the [F3] switch to enter the setting. If the setting is not entered even
though it has been changed, “ ! ” appears above the setting location, and when the setting location is moved
by turning [F], the value prior to the change is restored.
(8









Setting the MAC address
1 On the SETUP menu, turn [F1] to display the MAC menu.
The MAC address now appears.
(When the MAC address is “008045448000”.)
."$