Panasonic AV-HS300G - Manual (Page 3)

9
3. Setup
3-1-3. Setting the DVI input signals (IN6)
Selecting the signal system
Select the digital or analog system for the DVI input video signals.
DIG (digital): Digital input signals of the DVI connector are effective.
ANLG (analog): Analog input signals of the DVI connector are effective.
1 Press the [FUNC] switch to light its indicator, and then press the [SETUP] switch to display the SETUP
menu.
2 Turn [F1] to display the DVIIN menu.
3 Turn [F], and select the signal system using the MODE item.
'6-- "/-(
%7**/


.0%&

%*(
4$"-
/03.
Selecting the scaling method
XGA or SXGA can be input as the size. The frequency is fixed at 60 Hz.
NORM (normal): The size of the input images is increased or reduced while keeping their aspect ratio the
same.
FULL (full): The size of the input images is increased or reduced in accordance with the system
resolution. (The aspect ratio of the input images is not kept the same. The rate at which the
image size is increased or reduced in the vertical direction and in the horizontal direction
differs.)
On the DVIIN menu, turn [F3], and select the scaling method using the SCAL item.
<DVI input scaling size table>
DVI format Mode
HD/1080i HD/720P SD/NTSC* 1 SD/PAL* 2
1920  1080 1280  720 720  480 720  576
XGA
1024  768 NORM 







FULL 







SXGA
1280  1024 NORM 







FULL 







*1: 480/59.94i, *2: 576/50i