Panasonic BB-HCM331A - Manual (Page 49)

Operating Instructions
49 [For assistance, please call: 1-800-272-7033]
IPsec Mode Selection
Select transport mode or tunnel mode to access the camera.
Transport Mode (IPv4 Only)
The image is encrypted in the whole way between the camera and your PC. In the
environment of Windows XP Service Pack 1, transport mode is available only in
IPv4.
Prepare the following requirements.
Item Supported Feature
PC Operating System
Web Browser
ISP Service : Windows XP Service Pack 1
: Internet Explorer 6.0 or later
: Services for multiple global addresses (A
global address must be set up on your
PC.)
Note
To use IPsec, you need to set up your operating system.
See the Panasonic Network Camera support website at
http://panasonic.co.jp/pcc/products/en/netwkcam/ for
the setup.
Camera ISP Service : Services for multiple global addresses (A
global address must be set up to the
camera.)
Transport Mode
Encrypted