Panasonic MC-V5210 - Manual (Page 36)

- 36 - - 13 -
Power Tools on Board Cord Length
120V AC(60Hz) Yes 50 Ft. (15.25 m)
FEATURE CHART
Diagrama de características
Tableau des caractéristiques
Voltaje Herramientas Extensión
incluídas de cordón
120V AC(60Hz) 4 posición 15,25 m (50 pi)
Alimentation Accessoires Cordon
d’alimentation
120 V c.a. (60 Hz) Oui 15,25 m (50 pi)
Removing Clogs
Cover
(Suction Inlet)
Couvercle
(entrée
d’aspiration)
Cubierta
(Abertura de
aspiración)
Short Hose
Tuyau court
Manguera corta
Hose
Tuyau
Manguera
The hose located on the back of the
vacuum cleaner carries the dirt from the
nozzle up to the dust bag. If the hose
should become clogged:
➢ ➢ Unplug vacuum.
➢ ➢ Pull open suction inlet cover and
check for clogging.
➢ ➢ Disconnect wand from short hose
and check wand and hose.
➢ ➢ Plug in vacuum cleaner and turn on.
➢ ➢ Disconnect wand and stretch hose in
and out to remove clog.
➢ ➢ If clog still exists, turn vacuum
cleaner OFF and UNPLUG POWER
CORD.
➢ ➢ Remove lower plate.
➢ ➢ Remove short hose from nozzle by
lifting straight up.
➢ ➢ Inspect hose end and clear any
obstructions.
➢ ➢ Reinstall short hose and lower plate.