Planet Technology FNSW-2400S - Manual (Page 19)

FNSW-16/2400S User’s Guide
19
VLAN3 X X
VLAN4 X X
4.3 Port Status
Entry:
Select “2” from < Console Manu>
PORT 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
AutoN X X X X X X X X X X X X X X X X X X X X X X X X
BackP X X X X X X X X X X X X X X X X X X X X X X X
Pause X X X X X X X X X X X X X X X X X X X X X X X
SWITCH in 1-VLAN mode
Any key to quit!!
Purpose:
Display the Port Status group
AutoN for “Auto-Negotiaion”, BackP for “Back Pressure”, half-duplex
flow control. Pause for “Pause frame” stands for full-duplex flow
control.
4.4 Port Setting
Entry:
Select “3” port setting, press “ENTER”
Enter Port Number
Purpose:
Set up the port setting group
Port Setting chart example 1
Set port 1 to works in 100Mbps Full-Duplex mode
Enetr Port Number ((qq) to quit)>> 1
Select (1)Port Mode (2)Pause (3)Back Pressure>>1
Select (1)Auto_Nego (2)100FDX (3)100HDX (4)10FDX (5)10HDX>>2
Port Setting chart example 2