Panasonic AG-DVC60P - Manual (Page 67)

MENUS
67
The underlining indicates the factory setting.
32K (12bit) AUDIO item/AUDIO OUT item settings and audio track signals output from the
AUDIO IN/OUT jack
PLAYBACK FUNCTIONS screen
Item/
(Display
mode)
Description of settings
SEARCH
(VCR) Use this to set the operation to be performed
when an INDEX button (i or u) on the
remote control unit is pressed.
PHOTO:
A photo search is conducted. (P47)
SCENE:
An index search is conducted. (P47)
32K (12bit)
AUDIO
(VCR) Use this to set the sound to be output as CH1
and CH2 signals when playing back a tape
that was recorded in the 32K (12-bit) audio
mode.
ST1:
This selects the sound that was recorded
during shooting.
CH1 signals = CH1 track
CH2 signals = CH2 track
ST2:
This selects the sound that was dubbed
on the recording.
CH1 signals = CH3 track
CH2 signals = CH4 track
MIX:
This mixes the sound that was recorded
during shooting and the sound that was
dubbed on the recording.
CH1 signals = CH1 + CH3 tracks
CH2 signals = CH2 + CH4 tracks
<Note>
When sound is recorded in the 48K (16-bit)
audio mode, CH3 and CH4 do not exist so
the following always stands:
CH1 signals = CH1 track
CH2 signals = CH2 track
Item/
(Display
mode)
Description of settings
AUDIO OUT
(VCR) Use this to set the audio signals to be output
from the AV IN/OUT jack when the tape is
played back.
CH1•CH2:
CH1 output = CH1 signals
CH2 output = CH2 signals
CH1:
CH1 output = CH1 signals
CH2 output = CH1 signals
CH2:
CH1 output = CH2 signals
CH2 output = CH2 signals
Audio recording
mode
32K (12bit) AUDIO
item setting
AUDIO OUT
item setting AUDIO IN/OUT jack
CH1 output
AUDIO IN/OUT jack
CH2 output
32K (12-bit)
ST1
CH1•CH2
CH1
CH2
CH1
CH1
CH2 CH2
CH1
CH2
ST2
CH1•CH2
CH1
CH2
CH3
CH3
CH4 CH4
CH3
CH4
MIX –––– CH1+CH3 CH2+CH4
48K (16-bit) ––––
CH1•CH2
CH1
CH2
CH1
CH1
CH2 CH2
CH1
CH2