Sw mode screen, P68), 68 menu configuration (cont.) – Panasonic AG-DVC60P User Manual
Page 68
68
Menu configuration (cont.)
The underlining indicates the factory setting.
SW MODE screen
Item/
(Display
mode)
Description of settings
USER1
(CAM) (VCR)
This enables one function to be allocated to
the USER1 button.
g Camera menu mode
(PUSH) AF+ZOOM:
Select this to execute one-touch zooming.
(P36)
(PUSH) AF:
Select this to switch to auto focus mode
when the camera-recorder is operated in
the manual focus mode but only while the
button is held down.
WHITE BAL:
This works in the same way as the WHITE
BAL button when the white balance is to
be set.
AWB LOCK:
Select this to enable operations to be per-
formed with the white balance that was in
effect when the button was pressed while
operating the camera-recorder in the auto
white balance mode.
BACKLIGHT:
Select this to set the backlight compensa-
tion function to ON or OFF.
(P36)
SPOTLIGHT:
Select this to set the auto iris control for
the spotlight to ON or OFF.
REC CHECK:
Select this to perform a rec check.
(P12)
D. ZOOM:
Select this to perform digital zooming.
(P31)
WHITEFADE:
Select this to fade out the whole image in
white while the button is held down during
shooting. At the same time, the sound is
also faded out.
Conversely, fade-in in white occurs when
the button is released. At the same time,
the sound is also faded in.
BLACKFADE:
Select this to fade out the whole image in
black when the button is held down during
shooting. At the same time, the sound is
also faded out.
Conversely, fade-in in black occurs when
the button is released. At the same time,
the sound is also faded in.
PHOTO SHOT:
Select this for photo shot recording.
INDEX:
Select this for index recording.
(P36)
SNS:
Select this to set the camera-recorder to
the high-sensitivity shooting mode.
Item/
(Display
mode)
Description of settings
EVF DTL:
Select this to emphasize the outlines of
the images on the screen when the button
is pressed so that the subject becomes
easier to bring into focus. “EVF DTL ON”
appears for about 2 seconds in the center
of the screen after the button has been
pressed. However, the regular images are
what is recorded, not the ones with their
outlines emphasized.
The original images are restored by press-
ing the button again. “EVF DTL OFF”
appears for about 2 seconds in the center
of the screen.
LUMI-FLICK:
Select this to make the screen flicker so
that images which will give the impression
that reels of photographic film are turning
just as they did years ago are recorded.
AE LOCK:
Select this to set the camera-recorder to
the AE lock mode.
STILL:
To shoot still pictures.
(P36)
COLOR BAR:
To show the color bar.
EFFECT:
To select image effects.
g VCR menu mode
BLANK SEARCH:
Select this to conduct a blank search.
(P46)
AUDIO DUB:
This works in the same way as the A.DUB
button on the remote control unit when
performing audio dubbing.
INDEX:
Select this for index recording.
USER2
(CAM) (VCR)
This enables one function to be allocated to
the USER2 button.
For further details, refer to the USER1 item.
g Camera menu mode
(PUSH) AF+ZOOM, (PUSH) AF, WHITE
BAL, AWB LOCK, BACKLIGHT, SPOT-
LIGHT, REC CHECK, D. ZOOM, WHITE-
FADE, BLACKFADE, PHOTO SHOT,
INDEX, SNS, EVF DTL, LUMI-FLICK, AE
LOCK, STILL, COLOR BAR, EFFECT
g VCR menu mode
BLANK SEARCH, AUDIO DUB, INDEX
USER3
(CAM) (VCR)
This enables one function to be allocated to
the USER3 button.
For further details, refer to the USER1 item.
g Camera menu mode
(PUSH) AF+ZOOM, (PUSH) AF, WHITE
BAL, AWB LOCK, BACKLIGHT, SPOT-
LIGHT, REC CHECK, D. ZOOM, WHITE-
FADE, BLACKFADE, PHOTO SHOT,
INDEX, SNS, EVF DTL, LUMI-FLICK,
AE LOCK, STILL, COLOR BAR, EFFECT