Pride Mobility LEGEND CLASSIC XL-8 - Manual (Page 18)

18 www.pridemobility.com Legend Classic XL-8
I V . Y O U R S C O O T E R
TILLER CONSOLE
The tiller console houses all of the controls needed to drive your scooter, including the speed adjustment dial,
throttle control lever, battery condition meter, lights switch, hazard lights switch, turn indicator buttons, status LED,
and horn buttons. See figure 8.
WARNING! Do not expose the tiller console to moisture. In the event that the tiller console
does become exposed to moisture, do not attempt to operate your scooter until the tiller
console has dried thoroughly.
Figure 8. Tiller Console
Key Switch
! Insert the key into the key switch and turn it clockwise to power up (turn on) your scooter.
! Turn the key anticlockwise to power down (turn off) your scooter.
Battery Condition Meter
When the key is fully inserted and turned clockwise to power up your scooter, this meter indicates the approximate
battery voltage strength. For further information on battery charging, see V. “Batteries and Charging.”
Turn Indicator Buttons
! Press the appropriate turn indicator button once to activate it.
! The turn indicators are timed to shut off automatically.
Hazard Lights Switch
This switch activates the 4-way flashers on your scooter.
! Toggle the switch forward to turn on the flashers.
! Toggle the switch rearward to turn off the flashers.
400/181
HAZARD LIGHTS SWITCH
HORN BUTTON
KEY SWITCH
LIGHTS SWITCH
HORN BUTTON
SPEED ADJUSTMENT DIAL
THROTTLE CONTROL LEVER
TURN INDICATOR BUTTON TURN INDICATOR BUTTON
BATTERY CONDITION METER
POWER SEAT SWITCH (OPTIONAL)
STATUS LED
HI-LOW SWITCH (CLASS 3 ONLY)
PUSH TO GO FORWARD
PUSH TO GO BACKWARD
PULL TO GO FORWARD PULL TO GO BACKWARD