PoGo Products Radio - Manual (Page 2)

IMPORTANT INFORMATION
1) Use the supplied USB cable to connect your Radio YourWay LX to your computer. The CD included with your Radio YourWay
LX is not required if you are using Windows XP, 2000, or ME. However, if your computer uses Windows 98 you will need to
install drivers that are found on the CD.
2) If no buttons are pressed within 20 seconds while in a Menu or Timer screen, the Radio YourWay LX will “time out” and return
to the opening screen. All recent changes will be lost. For example, if you press the menu button, but you do not select a menu
option within 20 seconds your Radio YourWay LX will return to the mode screen it was in prior to the menu button being pressed.
3) By default the Radio YourWay LX will turn itself completely off after three minutes if unused.
4) Before you start we recommend formatting the internal memory of the Radio YourWay LX and SD card, if you purchased one:
• Turn the Radio YourWay LX on by pressing the i/ $ (play) button for three seconds.
• Press the Menu button.
• Press y (down) and scroll to “INT FORMAT #6” (or for an SD card “EXT FORMAT #7”). Press the i/ $ (play) button to select.
• Press GG (left) to check the YES box.
• Press Y / $ (play) to confirm and you’re ready to go!
When inserting an SD memory card ensure that the card is
inserted properly as shown in the diagram (taking note of the
correct side up) or you may damage the card and/or external
card slot.
By pushing the A-B REPEAT button, you can switch between
the internal memory of the Radio YourWay and the SD memory
card. The small icon showing “INT” or “SD” located above the
month will indicate the current memory mode you are using.
FULL BATTERY LOW BATTERY
Setting the Time
• Make sure you always have enough battery power. After
1 or 2 hours of the battery being fully discharged, the
year/day / h our settings are all lost and must be set again.
• In order for timer recordings to function properly, the correct
time and date must be set. See below for Setting the Date.
Press MENU and select “Time Set” using the Y / $ (play) button.
You will now see a screen similar to the one shown below.
To change the hour and minute use the t (up) and I (down)
buttons. To move between the hour and minute fields use the
GG
(left) and HH (right) buttons. Push the Y / $ (play) button to
confirm the date you have set is correct.
Setting the Date
Press MENU and scroll to “Calendar” using the I (down)
button. When “Calendar” is highlighted press Y / $ (play).
You will now see a screen similar to the one shown below.
To move between the Year/Month/Date fields use the U (up)
and I (down) buttons. To change the Year/Month/Date use
the GG (left) and HH (right) buttons. Push the Y / $ (play)
button to confirm the date you have set is correct.
To exit the MENU screen, press the MENU button.
Charging the Battery
Using a Memory Card
Important Information
Please fully charge the battery prior to using the Radio
YourWay LX. The battery can be charged using the AC
adapter, or by connecting it to a PC or MAC with the
included USB cable. It takes approximately 4 hours to fully
charge the battery using either method.
Copyright ©
C.Crane Company
, Inc. 2006