PoGo Products Radio - Manual (Page 3)

There are four modes: “AM”, “FM”, “MUSIC”, and “VOICE”.
To switch between these, press the MODE button repeatedly.
Switching Modes
Voice Recording
Switch to the “MUSIC” mode and press the red REC
button. The small red light above the display screen should
be lit, indicating that you are now recording. After saying a
few words stop the recording by pressing the Y / $ (play)
button. You should now see some numbers scrolling across
the display. This represents the recording you just made. To
play the file back press Y / $ (play) button. (You may need
to adjust the volume.)
AM Recording
Switch to “AM” mode. (To switch between modes press the
MODE button repeatedly.) Press HH (right) or GG (left) on the
control circle to tune to another frequency. Once you have
selected a station, begin recording by pressing the red REC
button. The small red light above the display screen should
be lit, indicating that you are now recording. When you are
finished recording press the Y / $ (play) button. The
recording light should now be off. To replay your AM
recording, switch to “MUSIC” mode. A folder icon named AM
will now appear on the screen. Highlight the AM folder by
pressing I (down). Once highlighted press HH (right) to
open the AM folder. You should now see some numbers
scrolling across the display. This represents the recording
you just made. To play the file back press Y / $ (play) but-
ton. (You may need to adjust the volume.)
The “MUSIC” mode contains all recordings made on the
Radio YourWay LX, except for scheduled recordings. If you
recorded using a scheduled recording, your file will be found
in the “VOICE” mode in a folder titled “SCHEDULE”. If you
made a manual recording in the “AM” mode, your file will be
stored in the “MUSIC” mode in a folder titled “AM”. All other
types of recordings will be stored in their respective folders
(FM recordings will be stored in the “FM” folder, etc ... ). To
open a folder scroll I (down), highlight the folder you would like
to open and press HH (right). Once the folder is open you will
see a line of numbers beginning with a letter and ending with
.MP3. This is a recorded file. For example:
A001I05112109432700590.mp3
This is how it is broken down:
• A = AM
• 001 = recording number (#1)
• I05 = year recorded (2005)
• 1121 = date recorded (11/21)
• 094327 = time recording started (9:43 27)
• 00590 = frequency (590)
• . MP3 = format of recording
To play this file press Y / $ (play).
Retrieving Your Recording
Timer Recording
You can program the Radio YourWay LX to automatically
record your favorite broadcast by using the daily or weekly
timer function.
• Note: You cannot set a timer recording while the unit is
playing, recording, or in a menu.
1. Press and hold the TIMER button for 3 seconds to activate
the timer recording screen.
You will now see a screen similar to the one below.
2. Select a “SCHEDULE” slot (1-20) using the GG (left) or HH
(right) buttons.
3. Move between the different timer setting categories using
the U (up) or I (down) buttons.
The first Timer Setting is “TYPE”. Use the I (down) button to
highlight “TYPE”. Now you may modify this setting by pressing
GG
(left) or HH (right) to select either “RECORD”, “PLAY” or
“DISABLE”. After you have made your selection press
I
(down) to move to the next item.
The next timer setting is “MEMORY”. Use the HH (right) button
to toggle between “INTERNAL” and “EXTERNAL” memory.
Press the I (down) button to move to the next item.
• Note: If you choose the “EXTERNAL” memory option
and no external memory card is inserted, you will
get a message saying “NOT INSERTED CARD”.
The next timer setting is “DATE SET”. This setting will
indicate what day or days you would like the recording to
begin. Use the GG (left) or HH (right) buttons to select “WEEK”
or “DATE”. “DATE” is only used to set a specific date in the
future for a one-time recording. The most common setting
used to record radio shows is “WEEK” because the unit will
automatically record every week on the day or days you specify.
This is the procedure if you select “WEEK”:
Press I (down) and highlight “WEEK”. Select “MON-FRI” or
“MONDAY”, “TUESDAY”, “WEDNESDAY”, “THURSDAY”,
“FRIDAY”, “SATURDAY” or “SUNDAY” using GG (left) or
HH
(right) buttons. Press the I (down) button to move to the
next timer setting.
• Note: If you want to record on more than one day other
than “MON-FRI” (for example: “MONDAY”,
“WEDNESDAY” and “FRIDAY”) you will need to
schedule a recording for each day.
This is the procedure if you select “DATE”:
Press I (down) and highlight “DATE”. Select the month using
the GG (left) or HH (right) buttons. Move to the day field by
pressing the I (down) button. Select the day you would like to
record by using the GG (left) or HH (right) buttons. Once you
set the month and day press the I (down) button to move to
the next timer setting.
The next timer setting is “SOURCE”. Use the HH (right) button
to choose between “AM”, “FM”, “MIC” or “LINE” setting. Use
the I (down) button to move to the next timer setting.
Copyright ©
C.Crane Company
, Inc. 2006