Pioneer DV-575A - Manual (Page 33)

Audio Settings and Video Adjust menus 06
33
En
Chapter 6
Audio Settings and Video
Adjust menus
Audio Settings menu
The Audio Settings menu offers features for
adjusting the way discs sound.
1 Press HOME MENU and select ‘Audio
Settings’ from the on-screen display.
2 Select and change settings using the /
/ / (cursor) buttons, and ENTER.
Audio DRC
• Settings: High , Medium , Low , Off
(default)
When watching Dolby Digital DVDs at low
volume, it’s easy to lose the quieter sounds
completely—including some of the dialog.
Switching Audio DRC (Dynamic Range
Control) to on can help by bringing up the
quieter sounds, while controlling loud peaks.
How much of a difference you hear depends on
the material you’re listening to. If the material
doesn’t have wide variations in volume, you
may not notice much change.
Note
• Audio DRC is only effective with Dolby
Digital audio sources.
• Audio DRC is only effective through the
digital output when Digital Out is set to
On , and Dolby Digital Out is set to Dolby
Digital > PCM (see Digital Audio Out
settings on page 35).
• The effect of Audio DRC also depends on
your speakers and AV receiver settings.
Virtual Surround
• Settings: On , Off (default)
Switch on Virtual Surround to enjoy realistic
surround sound effects from just two speakers.
Tip
• You can also use the SURROUND button
on the remote control to switch Virtual
Surround on.
Note
• 96kHz Linear PCM audio is automatically
downsampled to 48kHz if Virtual Surround
is switched on.
• The Audio Output Mode (see page 41)
must be set to 2 Channel in order to be
able to use Virtual Surround.
Audio Settings
Audio Settings
Virtual Surround
Audio DRC
Dialog
On
Off
DV575A KU_Mid.book 33 ページ ２００４年２月６日 金曜日 午後２時３８分