Pioneer HDD MULTIMEDIA AV NAVIGATION SERVER AVIC-Z1 - Manual (Page 14)

12
Chapter
2
How to Use
the N
aviga
tion System a
n
d Na
mes of t
h
e Pa
rt
s
3 V button
Press to enter the PICTURE ADJUSTMENT
mode.
➲ Operating the Picture Adjustment ➞ Opera-
tion Manual
Press and hold to turn off the back light of the
LCD panel. To turn on the back light, press this
button again.
4 Signal receptor
This area receives signals from a remote control
(sold separately).
5 VOL (/) button
Pressing on the  side of the button to increase
the volume of the audio source while pressing on
the  side of it to decrease the volume of the
audio source.
You can not adjust the sounds of the navigation
features (e.g. guidance voice) and phone volume.
6 AV button
Press to switch the screen to the audio operation
screen. If you press the AV button again, the
source switches.
❒ Press and hold the AV button to turn off the
source.
7 MENU button
Press to display a navigation menu of the naviga-
tion system.
Press and hold to display Phone Menu when the
Bluetooth unit (sold separately) is connected to
this navigation system.
8 MAP button
Press to view the navigation map screen. Also,
when the map is scrolling, pressing this button
returns you to the display of the map of your sur-
roundings. Use to switch the view mode of the
navigation when the map of your surroundings is
displayed.
9 TRK (/) button
Pressing this button when the built-in DVD drive
source is selected skips a track or a chapter.
Press and hold to fast forward/fast reverse a track
or a chapter.
❒ Various operations are possible depending on
the Audio source.
a P.LIST (/) button
Changes the discs in the magazine during the
multi-CD player (sold separately) operation.
Switches preset channels during the Radio oper-
ation.
❒ Various operations are possible depending on
the Audio source.
b T button*
Preset button for Traffic audio service provided by
XM or SIRIUS satellite radio tuner. Press and
hold this button while on the desired channel to
assign preset and you can recall that later. Press
once to tune to that station from any source.
When the XM tuner and SIRIUS tuner are not
connected:
Not used.
➲ “Using the AV Source (XM, SIRIUS)” ➞ Opera-
tion Manual
c LCD panel
d LCD screen
e Disc loading slot
Insert a disc to play.
f EJECT button
Press to eject the disc from the disc loading slot.
About the Power Supply of the
Navigation System
How to turn the power on or off
The power to this navigation system turns on or
off in conjunction with the ignition switch (ACC)
of the vehicle. There is no power switch.
How to turn off the screen tem-
porarily
Touch and hold the V button to turn off the
screen for a while, and the navigation system
enters the standby mode.
❒ To cancel the standby mode, press the V but-
ton again, or touch the screen.
*: XM (GEX-P10XMT, GEX-P920XM) or SIRIUS
(SIR-PNR2) satellite radio tuner is required,
together with an appropriate active subscrip-
tion respectively.