Planet Technology FNSW-4800v2 - Manual (Page 12)

11
Figure 2-3 Attaching the brackets to the Switch
Caution
You must use the screws supplied with the mounting
brackets. Damage caused to the parts by using incorrect
screws would invalidate your warranty.
Step 3: Secure the brackets tightly.
Step 4: Follow the same steps to attach the second bracket to the
opposite side.
Step 5: After the brackets are attached to the Switch, use suitable
screws to securely attach the brackets to the rack, as shown
in Figure 2-4.
Figure 2-4 Mounting the Switch in a Rack
Step 6: Proceed with the steps 4 and steps 5 of section 2.3.1 Desktop
Installation to connect the network cabling and supply power
to your Switch.