Planet Technology FNSW-4800v2 - Manual (Page 9)


2. Hardware Description
This product provides two different running speeds – 10Mbps, 100Mbps
in the same Switch and automatically distinguishes the speed of
incoming connection.
This section describes the hardware features of FNSW-4800. For easier
management and control of the Switch, familiarize yourself with its
display indicators, and ports. Front panel illustrations in this chapter
display the unit LED indicators. Before connecting any network device
to the FNSW-4800, read this chapter carefully.
2.1 Front Panel
The Front Panel of the FNSW-4800 Fast Ethernet Switch consists of 48x
Auto-Sensing 10/100Mbps Ethernet RJ-45 Ports, the LED Indicators are
also located on the front panel of the FNSW-4800.
Figure 2-1 FNSW-4800 Switch front panel
2.1.1 LED indicators
System
LED Color Function
PWR Green Lights to indicate that the Switch has power.
Per 10/100Mbps port
LED Color Function
LNK/ACT Green
Lights to indicate the link through that port is
successfully established.
Blinks to indicate that Switch is actively
sending or receiving data over that port.