Polycom C100 - Manual (Page 6)

Polycom ® Communicator User Guide - 4
Please begin by installing the IP
softphone application on your
computer.
After you have completed the
installation of your Internet
softphone application, connect the
Polycom Communicator C100 to
the port on your computer in the
following manner:
Flip open the back cover of the
Polycom ® Communicator C100
unit.
Unwind the USB cable.
Open up the back cover/stand
to its locked position. (For best
acoustic performance, the unit is
designed to stand at a 40À angle to
the surface it rests upon.)
Insert the USB cable of the unit
into a USB port on your computer.
To download software for
integration with Polycom PVX
applications, please go to:
www.polycom.com/support/
communicator
Download the file called „Polycom
Communicator version 2.0.X for
PVX‰.
Setup