Polycom C100 - Manual (Page 8)

Polycom ® Communicator User Guide - 6
In order to use this device, you
will need to have Microsoft ®
Windows ® XP installed on your
computer.
For best acoustic performance,
always use the device with its back
cover/stand opened to the locked
position.
For private conversations,
stereo headphones can be plugged
into the side of the Polycom
®
Communicator C100 unit. If you
have a set of desktop PC speakers
you can plug them into the 3.5mm
headphone port on the side of the
Polycom Communicator for stereo
sound.
You can use the Windows ®
Sounds and Audio Devices
screen to adjust the volume of the
microphones and speaker.
Please note that the Polycom
Communicator automatically becomes
your default Windows Audio Device
(Mic & Speaker) when it is plugged
into your computer. If you do not want
the Polycom Communicator to be your
default Windows Audio Device you can
change your audio settings by doing the
following: Select „Start‰ „Se ttings‰
„Control Panel‰ „S ounds and Audio
Devices‰ „A udio‰ then select
your embedded sound card from the
drop-down menu for „Default Audio
Device‰.
If you make this change you will then
need to go to the audio settings within
the Internet softphone application
and make Polycom Communicator the
default sound device.
For additional information about
the Polycom ®
Communicator C100
or other Polycom ® products,
please visit www.polycom.com.
Tips