Connecting your tv, Ipod playback 03, Setting the video output – Pioneer XW-NAS5 User Manual

Page 11

Advertising
background image

iPod playback

03

11

En

English

Français

Deutsch

Nederlands

Italiano

Español

1

Attach the Dock adaptor to iPod

connector port on the top panel of this unit.

• An iPod Dock adaptor is not supplied with

this unit.

When attaching the Dock adaptor, be sure to
orient the front-back directions of the Dock
adaptor correctly. To attach, first place the
protruding tabs on the front side of the adaptor
into the depressions on the iPod connector
port and press into position. When attaching
the adaptor, be careful not to strike the
connectors.

2

Connect your iPod.

Connecting your TV

To watch iPod images on a television, perform
connections using either a composite video
cable or component video cable.

• When using a component video cable for

connections, it is necessary to adjust the
unit’s video output. See Setting the video
output
below.

• When an iPod is connected to this unit, the

iPod’s TV output setting is automatically
set to ON. While connected, the iPod can
be used to switch the TV output setting.

1

Caution

• Before making or changing the

connections, switch off the power and
disconnect the power cord from the power
outlet. Plugging in should be the final step.

Setting the video output

Adjust the video output on this unit in
accordance with the method used to connect
the television.

2

• Default setting:

(Composite)

1

Switch the unit into standby.

2

Press SETUP.

3

Use

/ to select ‘

’, then press

ENTER.

Note

1

This function is limited to iPod models providing TV output settings.

When the iPod is disconnected from this unit, the iPod’s TV output setting returns to its original state.

2

Stop the iPod’s video playback before adjusting the video output setting. The setting mode is disabled during playback and

pause.

During the video output setting process, if no button operation is performed for 3 minutes, the setting will be canceled and

power will return to the standby mode.

COMPONENT VIDEO

MONITOR OUT

VIDEO 1

VIDEO 2

ADAPTER PORT

Y

P

B

P

R

AUDIO IN

Component

video cable

(commercially

available)

TV

Composite

video cable

(commercially

available)

PRESET

PRESET

ENTER

SLEEP

CLOCK

SETUP

WAKE

UP

TUNER

PRESET

BASS/

TREBLE

TUNE

TUNE

XW-NAS5_CUXJ.book 11 ページ 2010年1月26日 火曜日 午後5時0分

Advertising