Pioneer DV-393-S - Manual (Page 14)

Connecting up 02
14
En
Connecting to an AV receiver
To enjoy multichannel surround sound you
need to connect this player to an AV receiver
using the digital audio output.
In addition to a digital connection, we
recommend also connecting using the stereo
analog connection.
You’ll probably also want to connect a video
output to your AV receiver. You can use any of
the video outputs available on this player (the
illustration shows a standard (composite)
connection).
1 Connect the DIGITAL AUDIO OUT
COAXIAL jack on this player to a coaxial
digital input on your AV receiver.
Use a coaxial cable (similar to the supplied
video cable) to connect the
COAXIAL DIGITAL
AUDIO OUT jack to a coaxial input on your AV
receiver.
2 Connect the analog AUDIO OUT L/R and
VIDEO OUT jacks on this player to a set of
analog audio and video inputs on your AV
receiver.
• You can use the SCART AV connector, or
the S-video or component video jacks to
connect to the AV receiver if you prefer.
Connecting using HDMI (DV-
490V only)
If you have a HDMI equipped monitor or
display, you can connect it to this player using
a commercially available HDMI cable.
The HDMI connector outputs uncompressed
digital video, as well as almost every kind of
digital audio that the player is compatible with,
including DVD-Video, Video CD/Super VCD,
CD and MP3.
1 Use an HDMI cable to connect the HDMI
OUT interconnect on this player to an HDMI
interconnect on a HDMI-compatible
monitor.
DIGITAL AUDIO OUT
L
R
P R
P B
Y COAXIAL
COMPONENT VIDEO OUT
AUDIO OUT VIDEO OUT
HDMI
OUT
AV receiver
DIGITAL IN
(COAXIAL)
DIGITAL AUDIO OUT
L
R
P R
P B
Y COAXIAL
COMPONENT VIDEO OUT
AUDIO OUT VIDEO OUT
HDMI
OUT
AV receiver AUDIO/
VIDEO IN
DIGITAL AUDIO OUT
L
R
P R
P B
Y COAXIAL
COMPONENT VIDEO OUT
AUDIO OUT VIDEO OUT
HDMI
OUT
HDMI-compatible display
HDMI
connector
DV393_WV.book Page 14 Wednesday, January 25, 2006 11:19 AM