Pioneer DV-393-S - Manual (Page 43)

Additional information 08
43
En
Selecting languages using the
language code list
Some of the language options (such as ‘DVD
Language’ in the Setup Navigator) allow you to
set your preferred language from any of the 136
languages listed in the language code list on
page 46.
1 Select ‘Other Language’.
2 Use the / (cursor left/right) buttons
to select either a code letter or a code
number.
3 Use the / (cursor up/down) buttons
to select a code letter or a code number.
See Language code list on page 46 for a
complete list of languages and codes.
HDMI troubleshooting (DV-490V)
Incorrect operation is often mistaken for trouble or malfunction. If you think that there is
something wrong with this component, check the points below. Sometimes the trouble may lie in
another component. Inspect the other components and electrical appliances being used. If the
trouble cannot be rectified after checking the items below, ask your nearest Pioneer authorized
service center or your dealer to carry out repair work.
Problem Remedy
No HDMI audio output. • This unit has been designed to be compliant with HDMI (High
Definition Multimedia Interface). Depending on the component you
have connected, unreliable signal transfers may result.
• If the front panel HDMI indicator is lit:
– You won’t hear any sound from the HDMI output if the source
component is only DVI/HDCP-compatible.
• If the front panel HDMI indicator is unlit then:
– Make sure that you’ve selected this player as the HDMI input in the
settings for the component you’re using. You may need to refer to the
instruction manual of the component to do this.
– Check that the HDMI cable is connected properly and that the cable
isn’t damaged.
– Check that components connected using the HDMI interface are
switched on and HDMI compatible.
DV393_WV.book Page 43 Wednesday, January 25, 2006 11:19 AM