Panasonic KV-S4085CW - Manual (Page 55)

3. Remove dirt on the sensors with the included blower ( 1 ), then wipe the image sensor covers with the
roller cleaning paper (page 48).
How to clean the sensors and reflectors
Remove the brush from the blower ( 1 ), place it on the holes for the sensors and reflectors ( 2 ), as well
as the conveyor indentations ( 2 ), and blow off dirt, as shown in the illustration below.
1
2
Location of Sensors
5
4 4 3
6 7
3
Waiting sensor
4
Skew sensors
5
Double feed detectors
(For the KV-S4065CL /
KV-S4065CW, there is only 1 double
feed detector in the center.)
6
Starting sensor
7
Image sensor cover (B)
9
10
8
8
Double feed detectors
(For the KV-S4065CL /
KV-S4065CW, there is only 1 double
feed detector in the center.)
9
Paper sensor
10
Image sensor cover (F)
Operating Manual 55
Care and Maintenance