Panasonic KV-S4085CW - Manual (Page 62)

Replacing the Double Feed Prevention Roller
Before replacing the double feed prevention roller, make sure that the hopper is in the "Low" position. The
double feed prevention roller cover cannot be opened if the hopper is not in the "Low" position.
For details on adjusting the hopper’s height, see "Changing the Hopper Position" (page 23).
1. Set the power switch ( 1 ) of the scanner to " " (OFF), and unplug the power cord.
1
2. Pull the front door release ( 1 ) towards you, and open the front door ( 2 ).
1 2
62 Operating Manual
Replacement Parts and Optional Units