Powermate CYCLONE P-WB-163150-[E] - Manual (Page 2)

Questions? Call Toll Free at 1-800-737-2112 Copyright © 2009 MAT Engine Technologies, LLC
Oil Fill Location
Do Not Overfill
Gasoline Fill Location
Do Not Overfill
On/Off Switch
Switch to “OFF” to stop unit
PUSH TO PRIME
Push primer 3 times before starting a cold
engine - may not be requireed to restart a
warm engine.
Rotate index lever to change airflow angle:
15º down, Level, 15º up
Instructions for attaching Front Flow Attach-
ment to Unit
Instructions for storing Front Flow
Attachment under frame
Instructions of Front Flow Attachment stor-
age on unit
Indicates WARNING, DANGER, or CAUTION.
Wear eye protection complying with ANSI Z87.1
and hearing protection.
Read operator’s manual before operating this
machine. Failure to follow directions could result
in serious injury.
Disconnect spark plug wire when not in use or
before servicing, cleaning, or performing mainte-
nance on the unit.
Do not use if children or bystanders are present.
Engine exhaust contains carbon monoxide, an
odorless and deadly gas. NEVER run unit indoors
or in a poorly ventilated area.
Unit will blow objects and debris at high speeds.
Never stand in front of discharge chute. Never allow
discharge chute to point toward bystanders, pets, or
valuable property.
Do NOT touch hot muffler or cylinder. These
parts are extremely hot from operation and may
remain hot for a short time after operation.
There are rotating blades inside the blower which
can cause serious injury. Keep hands out of intake
and discharge openings. Never insert foreign objects
such as sticks or tools into the intake guards or
discharge chute.
To reduce risk of fire, clean spilled gas and oil and
keep unit free from debris. Gasoline is extremely
flammable. Allow machine to cool completely before
refueling.
Do NOT operate machine without shields, guards,
and safety devices (e.g. intake guard) in place and
working.
Safety Definitions
• Save these instructions
Safety Warning Symbols
Control and Operating Symbols
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, may result in minor/moderate injury or
equipment/property damage.
DANGER
CAUTION
WARNING
The following symbols are used on the product and in this manual to alert the operator of potential safety hazards. Read
them carefully, and understand their meaning.
Safety Alert Symbols
The following symbols can be found on your blower. Carefully read and understand their meaning.
Important
Safety
Information
1