PYLE Audio PVNTT5U - Manual (Page 3)

PREPARATION FOR USE
2
Carefully remove the unit from the display carton and remove all packing
material from the unit.
Unwind the AC power plug and extend it to its full length.
Place the unit on a stable, level surface, convenient to an AC outlet, out of
direct sunlight, and away from sources of excess heat, dust, moisture,
humidity, or strong magnetic fields.
Connect the plug to your AC outlet.
UNPACKING AND SET UP
Remove the opaque white plastic stylus
cover from the phonograph stylus by
sliding it in the direction of the arrow.
Discard the stylus cover.
Remove the twist-tie that was used to
secure the tone arm during shipment.
Release the tone arm lock lever.
Connect the plug to your AC outlet.
STYLUS COVER
TONE ARM LOCK LEVER
POWER SOURCE
This product is designed to operate on 120V 60Hz AC only. Attempting to
operate this system from any other power source may cause damage to the
system, and such damage is not covered by your warranty.
NOTE: You will note that this system is equipped with domestic standard AC
power 2-pin plug. If this plug does not fit into your
existing AC outlet, do not try to defeat this safety
feature by filing the wide blade to make it fit into
your outlet. If this plug will not fitinto your outlet,
you probably have an outdated non-polarized AC
outlet. You should have your outlet changed by a
qualified licensed electrician.
AC Outlet
AC Plug