PYLE Audio PVNTT5U - Manual (Page 7)

PLAYING TURNTABLE
This system includes a full-size, 3-speed, belt-drive turntable. You can play
and RPM records.
33,
45, 78
Set the PC-AUX switch to PH position. Insert the PC-USB line into the
Computer. Rotate the volume control to desert level.
1)
Make sure that you have removed the stylus cover from the stylus and
have released the Tone Arm Lock that secured the tone arm to the tone
arm rest.
3)
Set the turntable Speed Selector to the appropriate speed, 33, 45, or 78
RPM. If you are playing 45 RPM singles , place the 45 RPM adapter on
the centre spindle.
4)
Place your record on the centre spindle. 5)
Raise the CUE lever to lift the tone arm off its rest. Move the tone arm to
the edge of the record. The turntable starts automatically. Use the CUE
lever to gently lower the tone arm onto the record.
6)
When the tone arm reaches the end of the record it automatically returns to
the tone arm rest and the record player stops.
8)
To turn the system ‘off’ , switch the PH-AUX selector to the AUX
position.
9)
NOTE: Do not turn or stop the turntable manually. Moving or jarring the
Turntable without securing the Tone Arm clamp could result in damage to the
Tone Arm.
6