Pentair Light Direct Connect Kit - Manual (Page 3)

Light Direct Connect Fitting Installation Guide
3
Contents
Installation for IntelliTouch and EasyTouch Load Center ................................. 4
Installing for SunTouch Power Center .............................................................. 5
Installing the Light Direct Connect Fitting Using Non-Metallic PVC Conduit .. 6
Installing the Light Direct Connect Fitting Using Red Brass Conduit .............. 9
Light Direct Connect Kit
• Light Direct Connect kit 120 VAC - P/N 520967.
(16 AWG three conductor power cord. Black cord for
Pentair Water Pool and Spa light).
Overview
T he Light Direct Connect fitting is designed for use on the IntelliTouch ® load
center and power center, EasyTouch ® load center and SunTouch ® power center.
The Light Direct Connect seals the light power cord at end of the light conduit that
runs to the bottom of the load center. The Light Direct Connect fitting is installed
into a 3/4” knockout in the load center. The red brass NPT 1/2” or 3/4” PVC conduit
is threaded into the fitting.
Required Tools
• Medium size flat blade screwdriver.
• One inch pipe wrench.
• Torque wrench (in-lbs).
Possible adapter, 1” Crowsfoot wrench with drive.
Technical Support
Sanford, North Carolina (8 A.M. to 5 P.M. ET)
Moorpark, California (8 A.M. to 5 P.M. PT)
Phone: (800) 831-7133 - Fax: (800) 284-4151