Primera Technology Max - Manual (Page 10)

6 Optical Disc Laminator Connectivity Guide
b) While the LEDs are flashing, press the Pause
button. The Picking Mechanism will lower to the
Laminator Tray Position.
c) Adjust the Laminator Tray forward and back by
loosening the adjusting screws located towards the
front of the stand.
d). For left-to-right adjustment, nudge the Picker
Mechanism left by pressing the Pause Button or
nudge it right by pressing the Sequence Button.
e) Once the Picking Mechanism and Disc are
perfectly aligned press the Pick Button to end
calibration
Press Pause to Lower
Mechanism to Laminator
Tray Position
End Calibration
Nudge Picking Mechanism Right
(Counter Clockwise)
Nudge Picker Mechanism Left
(Clockwise)
510887.qxd 1/21/2004 7:35 PM Page 6
TOC