Primera Technology Max - Manual (Page 8)

4 Optical Disc Laminator Connectivity Guide
The following steps describe in detail how to connect the
Laminator to your DuplicatorMAX:
a. Connect the Laminator Stand to the left hand side of the
DuplicatorMAX as shown:
b. Remove the Input Bin closest to the Laminator Stand to
make room for the Laminator's disc tray.
c. Place the Laminator on the stand using the Locating Pegs
to align the Laminator properly.
d. Connect your Laminator to the PC using the provided USB
Cable.
e. The Laminator must now be aligned with the
DuplicatorMAX Picker Mechanism. This is done as
follows:
1) If the Laminator Tray is not in the "OUT" position,
press the Laminate Button on the Laminator to eject
the tray. Make certain the DuplicatorMax has been
connected to the computer and is on and ready to use.
2) Press the Sequence Button on the front of the
DuplicatorMax until the picker mechanism is
positioned over a bin containing discs.
3) Press the Pick Button on the front of the
DuplicatorMax to pick a disc.
4) Launch PrimoDVD Pro .
510887.qxd 1/21/2004 7:35 PM Page 4
TOC