Pyramid Technologies 3500 - Manual (Page 3)

USA07+ Automatically adjusts time to 2007 United States daylight saving
time (starts Second Sunday of March and ends First Sunday of November).
USA06- Automatically adjusts time to Pre-2007 United States daylight
saving time (starts First Sunday of April and ends Last Sunday of October).
EURO Automatically adjusts time to European daylight saving time. (Begins
last Sunday in March and ends on the last Sunday in October).
OTHER Allows you to select a custom start and end Sunday for automatic
daylight saving time changes. After SELECTING OTHER, use the UP or DOWN
key to select the desired Sunday (only Sundays are allowed) you wish to START
daylight saving time, press SELECT and again use the UP or DOWN key to select
the desired Sunday to END daylight saving time. Note: The time will automatically
change at 2 a.m. on the selected Sundays.
OFF- Unit will not adjust time for daylight saving time .
TIME STD=LINE. This option should only be changed for areas outside of the
U.S.A where there is frequency variation in the power lines. If you are operating
this unit in an
area that has problems with power line frequency resulting in the
unit losing or gaining time or you are running the unit off a generator/inverter, use
the UP or DOWN key to change the TIME STD to CRYSTAL which will cause the
unit to keep time using an internal device.
DSPLY FMT=AM/PM – Selects how the time will be displayed on the front of the
unit. Using the UP or DOWN keys, select one of the following options:
1. AM/PM - Standard time (1-12 hours).
2. MIL - Military time (0-24 hours).
PRINT FMT=AM/PM – Selects how time will be printed on the time card. Using
the UP or DOWN keys, select one of the following options:
1. AM/PM - Standard time (3:30PM)
2. MIL- Military time (3:30PM = 15:30)
3. ATAAP-Military time with minutes expressed in hundredths of hour
(3:30PM = 15.50)
4. 24H.1-Time with minutes expressed in tenths of an hour.
PRINT DIR=RIGHT – Use the UP or DOWN key to select print on the right side of
the time card or the left side (almost all time cards in the USA are right-sided).
FMT=DATE TIME – Use the UP or DOWN key to select which of the following
formats you want printed on time card:
1. DATE TIME – Prints current date and time.
2. DATE YR TIME – Prints current date, year, and time (small font).
3. DATE YR APPD – Prints current date, year, and APPD (approved)
message.
4. DATE YR FAXD – Prints current date, year, and FAXD (faxed) message.
3