Planet Technology USB ADSL Modem ADU-2000 - Manual (Page 22)

18
user
’s manual or consult network administrator to ensure correct-
ness of TCP/IP configuration. Meanwhile, parameters of TCP/IP con-
figuration shall be depended on your ISP; please consult with your
service provider about the configuration.
ADSL WAN configuration
1. After driver installation, Conexant Access Runner ADSL and AccessRunner
DSL icon should be added in the control panel and on the desktop.
2. Click the Conexant Access Runner ADSL icon, it will be displayed the status
of the modem.
3. Press Alt + P on the keyboard, the control panel appears.
4. Under the Protocol Setup please set the value of VCI, VPI and Encapsulation,
then click OK.