Planet Technology USB ADSL Modem ADU-2000 - Manual (Page 7)

3
Chapter 2
Installation
Please refer to the following steps to complete ADU-2000 installation.
Hardware Installation
1. Turn on your PC
2. Insert the rectangular end of a USB cable into the USB port of your PC. Then,
insert the square end of the USB cable into the USB port of the ADU 2000.
3. PC will automatically detect this router as
“USB Net Card”.
4. Insert bundled USB driver CD into the proper drive and follow instruction to in-
stall ADU 2000.
5. The
“Add New Hardware Wizard” will be displayed. Insert the driver CD and click
Next.
6. Choose the
“Search for the best driver for your device (Recommended)” and
click Next.
7. Select the
“CD-ROM drive”, and “Specify a location” and click Browse. Then,
specify the path which ADSL modem connected your computer to Internet, then
click OK.
Driver Installation for both LAN and WAN mode with
Win 98
1. The
“Add New Hardware Wizard” will be displayed. Click Next.
2. Choose the
“Automatic search for a better Driver (Recommended)” and click
Next.
2