Motion picture mode – Panasonic DMC-FX48 User Manual
Page 59
59
VQT1X57
Advanced (Recording pictures)
[REC] mode:
n
Advanced (Recording pictures)
Motion Picture Mode
•
When you set the picture quality to [
], [
] or [
], we recommend using a high-speed
card with “10MB/s” or greater displayed on the package.
Press
3/4 to select [REC QUALITY] and then press
1.
Slide the [REC]/[PLAYBACK] selector switch to [!].
Set the mode dial to [n].
Press the shutter button halfway to focus
and then press it fully to start recording.
A Audio recording
•
The available recording time
B is displayed on the top
right and the elapsed recording time
C is displayed on
the bottom right of the screen.
•
After pressing the shutter button fully, release it straight
away. If the button is held down, the sound will not be
recorded for a few seconds when recording starts.
•
When the subject is focused, the focus indication
lights.
•
The focus and zoom are fixed to the setting when
recording starts (the first frame).
•
The audio is also recorded simultaneously from the
built-in microphone on this unit. (Motion pictures
cannot be recorded without audio.)
Press the shutter button fully to stop recording.
•
If the built-in memory or the card becomes full in the middle of recording, the camera
stops recording automatically.
Changing the settings for the picture quality
Press [MENU/SET].
C
A
B
DMC-FX48P_PC~VQT1X57_eng.book 59 ページ ２００８年１２月２６日 金曜日 午後６時２５分