Panasonic DMC-FX48 - Manual (Page 95)

95
VQT1X57
Advanced (Playback)
You can add the audio after taking a picture.
Select [AUDIO DUB.] on the [PLAYBACK] mode menu. (P20)
Note
• Audio dubbing may not work properly on pictures recorded by other equipment.
• Audio dubbing does not work on motion pictures and protected pictures.
• Sound from motion pictures or pictures with audio recorded by this camera cannot be played
back by older models of Panasonic digital camera (LUMIX) launched before July 2008.
All the information regarding the [FACE RECOG.] of the selected image will be cleared.
Select [FACE RECOG.] on the [PLAYBACK] mode menu. (P20)
Note
• Cleared information regarding the [FACE RECOG.] cannot be restored.
• Images Cleared of [FACE RECOG.] will not be categorized for [CATEGORY PLAY].
• Clearing of [FACE RECOG.] cannot be done on a protected image.
B [AUDIO DUB.]
Press 2/1 to select the picture and then press
[MENU/SET] to start audio recording.
• The message [OVERWRITE AUDIO DATA?] screen appears
when audio has already been recorded. Press
3 to select [YES]
and then press [MENU/SET] to start audio recording. (The
original audio is overwritten.)
• Audio is recorded from the built-in microphone on the camera.
• If you press [‚], the audio dubbing is canceled.
Press [MENU/SET] to stop recording.
• It will automatically stop after recording about 10 seconds without
pressing [MENU/SET].
Press [‚] to return to the menu screen.
• Press [MENU/SET] to close the menu.
[FACE RECOG.]
Press 2/1 to select the picture and then press [MENU/SET]
Press 3 to select [YES] and then press [MENU/SET].
Press [‚] to return to the menu screen.
• Press [MENU/SET] to close the menu.
DMC-FX48P_PC~VQT1X57_eng.book 95 ページ ２００８年１２月２６日 金曜日 午後６時２５分