POSIFLEX Business Machines CR-4000 - Manual (Page 5)

5
CR4005/ 4105/ 4215/ CR4005-II/ 4105-II/ 4215-II
1). Define a drawer number for the cash drawer so that this cash drawer is going to respond
accordingly in USB communication. Follow the table below for SWITCH SETTING to
adjust the switch S1 according to this drawer number if it is not 7. Please note that
within each system there should never be any 2 USB interface cash drawers carrying the
same drawer number.
Rear View of Model CR4005/4105/ 4215/CR4005-II/ 4105-II/ 4215-II Cash
Drawer with USB Interface
SWITCH SETTING:
Drawer 0 1 2 3 4 5 6 7
SW1 ON OFF ON OFF ON OFF ON OFF
SW2 ON ON OFF OFF ON ON OFF OFF
SW3 ON ON ON ON OFF OFF OFF OFF
SW4 Reserved
Default setting: Drawer 7 (SW1: OFF; SW2: OFF; SW3: OFF)
2). Connect USB connector of cable coming out from the rear side of the USB interface
cash drawer to USB port of main PC.
3). Check the specification of power adaptor on its nameplate. Insert the power adaptor into
the correct power outlet. Insert the output plug to the jack at rear side of CR4005/ 4105/
4215/ CR4005-II/ 4105-II/ 4215-II to supply power for drawer kickout.
4). Install the USB utility driver from Posiflex Product Information CD with Posiflex POS
system or visit our web sites http://www.posiflex.com.tw or http://www.posiflextw.com
or http://www.posiflexusa.com for latest updates.
Connect to USB
Port of Main PC
Power Jack of CR4005/4105/4215/
CR4005-II/ 4105-II/ 4215-II USB Connector from CR4005/4105/
4215/CR4005-II/ 4105-II/ 4215-II
1 2 3 4
O
N
AC 12V I/P
S1
COM1
616P PHONE JACK
4PIN PHONE JACK
DB9