Pioneer Industrial VSX-94-TXH - Manual (Page 12)

Setup 04
12
En
17 Select ‘Change’ and press ENTER to confirm your
selection.
The
‘Edit Proxy Hostname’ screen appears.
18 Enter the address of your proxy server or the
domain name.
After entry, press the
 button or ENTER. The ‘Proxy
Port’ screen appears.
19 Select ‘Change’ and press ENTER to confirm your
selection.
The
‘Edit Proxy Port’ screen appears.
20 Enter the port number of your proxy server.
Use the numeric buttons to enter the port number. After
entry, press the
 button or ENTER. The ‘Setting OK?’
screen appears.
21 Press ENTER to complete the network setup
procedure.
The
‘Top Menu’ screen appears.
Checking the network settings
You can check the following network settings of this
receiver: the MAC address, the IP address, the gateway
IP address, the proxy server, the Subnet mask, and the
firmware version (for the Home Media Gallery of this
receiver).
Before proceeding with the following steps, check
whether you have followed Steps 1 and 2 on page 10.
3 Select ‘Information’ and press ENTER to confirm
your selection.
The
‘Firmware Version’ (for the Home Media Gallery of
this receiver) screen appears.
(The version of the illustration is not the latest.)
4 Check the network settings.
Press the
/ buttons to switch the display. Each time
you press the
/ buttons, the display switches as
follows.
Firmware Version  MAC Address 
IP Address  Gateway IP  Proxy Server 
Subnet Mask
5 Press RETURN.
The ‘Setup’ screen appears. To return to the ‘Top Menu’
screen, press RETURN again.
P rox y H o s t n a m e
H o m e M e d i a G - 5 5 . 0 dB
1
R e t u r n
[ ]
[ C h a n g e ]
E d i t P rox y H o s t n a m e
H o m e M e d i a G - 5 5 . 0 dB
p rox y
R e t u r n
P rox y Po r t
H o m e M e d i a G - 5 5 . 0 dB
1
R e t u r n
[ 0 ]
[ C h a n g e ]
E d i t P rox y Po r t
H o m e M e d i a G - 5 5 . 0 dB
8 0 8 0
R e t u r n
F i r m w a r e Ve rs i o n
H o m e M e d i a G - 5 5 . 0 dB
3 . 5 . 4 . 6 2 9 2
R e t u r n
VSX_94TXH_net.book Page 12 Monday, May 14, 2007 3:39 PM