Pentax Optio W20 - Manual (Page 29)

27
1
Getting Started
Use of the AC adapter kit K-AC8 (optional) is recommended if you intend
to use the camera for a long time or connect it to a PC.
1
Make sure that the camera is turned off and open the
battery/card cover.
2
Connect the DC terminal of the AC adapter to the DC
input terminal of the camera with the 2 symbol pointed
toward the LCD monitor.
3
Connect the AC plug cord to the AC adapter.
4
Plug the AC plug cord into the power outlet.
Using the AC Adapter
• Make sure that the camera is turned off before connecting or
disconnecting the AC adapter.
• Make sure that the AC plug cord and the power cord connecting
the AC adapter to the camera are inserted securely. The data may
be lost if either becomes disconnected while data is being
recorded on the SD Memory Card or the built-in memory.
• Use the AC adapter with due care to avoid fire or electric shock.
Be sure to read “USING YOUR CAMERA SAFELY” (p.1) before
using the AC adapter.
• Be sure to read the operation manual accompanying the AC
adapter kit K-AC8 before using the adapter.
• The battery inside the camera is not charged by connecting the AC
adapter to the camera.
• Do not apply excessive pressure to the front or back of the camera
when opening and closing the battery/card cover as this may dislodge
the waterproof packing. If the packing is not in the correct position, the
waterproof performance of the camera will be compromised.
4
AC adapter
AC plug cord
DC terminal
2
3
1