Pentax Optio W20 - Manual (Page 65)

63
4
T
aking
Pictu
res
R
In R (Program mode), the camera automatically sets the shutter speed
and aperture for taking still pictures. However, you can select other
functions such as the flash mode and recorded pixels.
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
Use the four-way controller (2345) to select R
(Program mode).
3
Press the OK button.
4
Set the functions you want to use.
Refer to “Setting the Shooting Functions”
(p.85 - p.103) for details of how to set the
functions.
5
Press the shutter release button
halfway.
The focus frame on the LCD monitor turns
green if the subject is in focus.
6
Press the shutter release button fully.
The picture is taken.
Setting The Functions (Program Mode)
If a shooting mode other than R mode has been selected, select
R mode from the Capture Mode Palette. (p.53)
Taking Still Pictures 1p.40
1
3, 4
3 8 3 8 3 8
1 4 : 2 5 1 4 : 2 5 1 4 : 2 5
0 9 / 2 5 / 2 0 0 6 0 9 / 2 5 / 2 0 0 6 0 9 / 2 5 / 2 0 0 6