Resuming playback from where you stopped, Stopping playback and switching power off, Getting st ar ted using your dvd pla yer – Pioneer DV-S88A User Manual
Page 27: Dvd-video/video cd, Press stop 7 once, Press play 3, Dvd/video cd/cd, Press stop 7 ( 7 / 0 on the front panel), Press open/close ( 7 / 0 on the front panel), Remove the disc
27
GETTING ST
AR
TED USING YOUR DVD PLA
YER
En
Resuming playback from
where you stopped
-
DVD-Video/Video CD
Use the resume feature to restart playback from the
point that the disc was stopped last time.
Press STOP
7 once.
The display shows “RESUME” and the stop position is
memorized.
• The resume position remains memorized as long as
the disc is in the player — even if you switch the
power off.
• Pressing STOP
7 twice causes the disc to return to
the beginning when PLAY
3 is pressed again. The
display shows the disc type (DVDs or Video CDs).
Press PLAY
3.
Playback starts from the resume position.
Notes
• The actual restart position may be slightly before or after
the resume position.
• If you want to remove the disc, but still want to resume
playback from the last stopped position, use the LAST
MEMORY feature instead (page 59).
• Resume is not possible with DVD-Audio discs.
0
4
¢
1
¡
7 0
8
3
Stopping Playback and
Switching Power Off
– DVD/Video CD/CD
SEARCH MODE
STEP / SLOW
RETURN
PREVIOUS
NEXT
REV
FWD
PAUSE
PLAY
VIDEO
ADJUST
DIMMER
JOG MODE
TOP MENU
SET UP
DISPLAY
AUDIO
SUBTITLE
ANGLE
OPEN /
CLOSE
FUNCTION
MEMORY
STOP
PROGRAM
REPEAT
RANDOM
0
9
8
7
+10
6
5
4
C
3
2
1
CLEAR
MENU
ENTER
V.ADJ
FL
F.MEM
JOG
8
7
3
A-B
4
¢
1
e
E
¡
AUDIO/ VIDEO
4(
4
)
1
2
3
1, 2
1
Press STOP
7 (7/0 on the front panel).
Playback stops.
2
Press OPEN/CLOSE (
7/0 on the front
panel).
The disc tray comes out.
3
Remove the disc.
4
Press STANDBY/ON on the front panel
( on the remote control). (DV-S88A)
The disc tray goes back in.
4
Press on the remote control. (DV-S838A)
The disc tray goes back in.
5
Press POWER on the front panel to turn
the player’s power off. (DV-S838A)
4(
5
)