Panasonic CF-T7 - Manual (Page 15)

15
Get
ting St
arted
U
seful In
formati
on
Troubleshooting
Appendix
Click [start] - [Control Panel] - [User Accounts] - [Create a new account].
CAUTION
Remember your password. If you forget the password, you cannot use the Windows
operation system. Creating a password reset disk beforehand is recommended.
<Only for model with Windows XP Professional>
A Click [start] - [All Programs] - [Fujitsu Touch Panel (USB)] - [Touch Screen
Calibration Utility].
B Touch the 9 “+” target marks sequentially with the stylus, and then press
Enter.
C Click [Save & Exit].
<Only for model with Windows XP Tablet PC Edition>
A Click [start] - [Control Panel] - [Other Control Panel Options] - [Tablet Cali-
bration].
B Touch the 9 “+” target marks sequentially with the stylus.
C Touch [OK] and restart the computer.
D Click [start] - [Control Panel] - [Printers and Other Hardware] - [Tablet and
Pen Settings].
E Select [Landscape] and click [Calibrate] with [Calibration] in [Settings].
F Touch the 4 “+” target marks sequentially with the stylus.
G Click [OK].
H Select [Portrait] and click [Calibrate] with [Calibration] in [Settings].
I Repeat step F and G above.
Perform steps D - I for each account.
NOTE
Regarding Windows XP
You can select the Classic view of Control Panel or the Classic Start menu. You can also change the way a user logs
on or off. This manual explains using the Windows XP default setting (not Classic view or Classic Start menu etc.).
Windows Update
You can update to the latest patches and service packs for Windows with the following menus.
[start] - [All Programs] - [Windows Update]
Do not apply “Driver Updates” even if a message to update a driver appears. If a driver update is required,
contact your technical support office.
If the message “Your computer might be at risk” is displayed
Select
(red icon) on the notification area and make the appropriate settings. The Windows Security Center reg-
ularly gives you notice so that you can make the optimum settings. This is not an error message and you can use the
computer. However, making appropriate measures is recommended to reduce the risk of virus and other attacks.
PC Information Viewer
This computer periodically records the management information including the hard disk information such as number
of hours powered-on, number of times powered-on, internal temperature, replacement sector. The maximum data
volume for each record is 750 byte.
These information are only used for estimating the cause when the hard disk goes down by any possibility. They are
never sent to outside via network nor used for any other purpose except for the purpose described the above.
To disable the function, add the check mark for [Disable the automatic save function for management information
history] in [Hard Disk Status] of PC Information Viewer, and click [OK].
When you disable the function, information on how to use the hard disk is not displayed.
(
Reference Manual “Check the Computer’s Usage Status” and Hard Disk Handling)
To conserve power, the following power saving methods are set at the time of purchase (When AC adaptor
is connected).
• The screen automatically turns off after 15 minutes of inactivity.
• The computer automatically enters standby
*1
after 20 minutes of inactivity.
*1 Refer to Reference Manual “Standby or Hibernation Functions” about resuming from standby.
Power consumption in each mode is as follows. (When AC adaptor is connected)
• When the screen is off Approx. 10 W
• In standby Approx. 1.9 W
• The battery pack is fully charged (or not being charged) and the computer is off Approx. 0.9 W
6 Create a new account.
7 Perform the touchscreen calibration.