Setup menus, User menu, Audio – Panasonic AJ-SD755 User Manual
Page 49
49
<Concerning the CUE output in the search mode>
The table below shows how the CUE output to the monitor and main signal system outputs differs according
to how the setup menu item (No. 721, No. 731 and No. 735) settings are combined.
731
CUE OUT
SEL
OFF
MANU
AUTO
PCM
MANU
----------
L/R
L
R
----------
----------
L/R
L
R
----------
PCM
2
1
PCM
2
1
CUE
CUE
CUE
PCM
2
1
PCM
2
1
PCM
2
2
PCM
2
1
CUE
CUE
PCM
2
1
CUE
PCM
2
1
CUE
PCM
2
2
CUE
PCM
2
2
PCM
2
1
PCM
2
2
PCM
2
1
PCM
2
2
PCM
2
2
PCM
2
1
CUE
CUE
PCM
2
1
PCM
2
1
CUE
PCM
2
1
PCM
2
1
PCM
2
2
CUE
PCM
2
2
AUTO
PCM
ON
721
MONI CH
SEL
735
MON AUTO
SEL
Monitor output
Main signal system output
CH1
Lch
Rch
CH2
<Notes>
2
1: PCM audio signal output is muted when the VTR is played outside the –0.43 to +1 normal speed.
2
2: PCM audio signal output is muted when the VTR is played outside the –10 to +10 normal speed.
When either AUTO is selected, the PCM audio signal is output within –0.43 to +1 normal speed even in
the automatic CUE output mode.
No./Item
Description
735
MON AUTO
SEL
Although CUE is automatically output to the
monitor output in accordance with the operation
mode when a setting AUTO has been selected by
setup menu item No. 721 (MONI CH SEL), the
MON AUTO SEL setup menu item is used to
select the monitor channel which is to be
automatically switched to CUE.
0000
L/R :
CUE is output to both the left and right channels.
0001
L :
CUE is output to the left channel only.
0002
R :
CUE is output to the right channel only.
734
MONI SEL INH
This selects whether the operation of the
MONITOR SELECT button on the front panel is to
be enabled or disabled.
0000
OFF : Operation is enabled.
0001
ON : Operation is disabled.
0002
ON1 :
Operation is disabled in the FULL display mode
and enabled only in the FINE display mode.
Setup menus
The underlined items indicates the initial setting.
USER menu
<AUDIO>
No./Item
Description
728
EMBEDDED
AUD
This selects whether to superimpose the
audio data onto the SDI output.
0000
OFF : Data is not superimposed.
0001
ON : Data is superimposed.
<Note>
When no optional board (AJ-YA755G) has been
installed, setup menu No. 728 is not displayed.
731
CUE OUT SEL
This selects whether or not the cue signal is
to be output to the main line output in the
search mode.
0000
OFF : CUE is not output.
0001
ON : CUE is output.
<Notes>
O
This function works only when a setting
other than MANU has been selected by
setup menu No. 721 (MONI CH SEL).
O
The main signal system output channels
used for the CUE output differ depending on
the setting selected by setup menu No. 735
(MON AUTO SEL).
When L/R is selected:
CUE is output to CH1 and CH4.
When L is selected:
CUE is output to CH1.
When R is selected:
CUE is output to CH2.
O
When PCM has been selected as the setup
menu No. 721 (MONI CH SEL) setting, PCM
is output.
733
CUE OUT
This selects the timing for the output picture and
CUE output when CUE has been selected for
monitor output.
0000 NORMAL : The timing is aligned with the
output picture.
0001
DIRECT : Whatever has been recorded on
the tape is output with no delay.
<Note>
When DIRECT has been selected, the timing of the
output picture and that of the cue output are not
aligned properly.