Panasonic BT-S950P - Manual (Page 2)

2
CAUTION:
To reduce the risk of electric shock, do not remove
cover.
Refer servicing to qualified service personnel.
FCC INFORMATION (U.S.A. only)
CAUTION: Changes or modifications not approved by
PANASONIC could void the user’s authority to operate
the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference when the equipment is operated in a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference in
which case the user will be required to correct the
interference at his own expense.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Ⅵ PRECAUTIONS
● Use only the power source specified on the unit.
(120 V AC, 50 Hz/60 Hz or 12 V DC)
● Keep flammable material, water, and metal objects
away from the unit — especially the interior of the unit.
● This unit incorporates high voltage circuitry. For your
own safety and that of your equipment, do not attempt
to modify or disassemble this monitor. There are no
user-serviceable parts inside.
● Unplug the monitor when you’re not going to be using
it for a long period.
Ⅵ HANDLING
● Avoid shocks or vibrations. These may damage the
unit and cause it to malfunction.
● Do not block the ventilation slots.
● Do not expose this unit to high temperatures.
Extended exposure to direct sunlight or a heater could
deform the cabinet or cause the performance of
internal components to deteriorate.
● Do not place the unit near appliances generating
strong electric or magnetic fields. These can
generate picture noise and instability.
● Keep the monitor clean by wiping the cabinet and
CRT screen with a piece of soft cloth. Do not apply
thinner or benzine. These chemicals can damage the
finish and erase printed letters. When the unit is
excessively dirty, use a diluted neutral cleanser, then
wipe away the cleanser with a dry cloth.
SCREEN BURN
● Try to avoid displaying still images or extremely
bright images on the screen for an extended period
of time. If left on screen for too long the image will
be permanently etched onto the CRT — a
phenomenon known as “screen burn”. Screen burn
is not a problem when displaying moving pictures
during video playback.
Notice (U.S.A. only)
This product utilizes both a Cathode Ray Tube (CRT) and
other components that contain lead. Disposal of these
materials may be regulated in your community due to
environmental considerations. For disposal or recycling
information please contact your local authorities, or the
Electronics Industries Alliance: <http://www.eiae.org.>
SAFETY PRECAUTIONS
LCT1182-001A-H (EN)Letter Size 02.3.15, 12:24 PM Page 2 Adobe PageMaker 6.0J/PPC