Piega Owners Manual Loudspeaker - Manual (Page 10)

PIEGA User Manual
Running in the Loudspeakers
As a loudspeaker is basically a mechanical transducer consisting of several different components, the individ-
ual elements must be run in during the initial weeks. This will ensure that the sound quality potential of your
loudspeakers is fully utilized. You will defi nitely notice the resulting improvement in sound.
Recommendations:
In the fi rst days and weeks listen only at normal
volume.
Avoid very high volume levels during initial phase.
Listen to a wide range of programme material.
Limit range:
The recommended amplifi er output is, depending on
the model, 20 – 250 Watt. It must be ensured that
the volume must only be turned up far enough for
the ear to register an overload.
If the loudspeaker chassis become damaged after a
long period of overload, this can be detected beyond
any doubt by PIEGA service technicians. In these
cases, PIEGA is not liable for any warranty claims.
Note:
Excessively loud music can damage your health.
Listen to music at an acceptable volume level for the
sake of your health.
10
PIE GA _M an ua l_ un i_ de _R Z.i nd d 1 9 PIEGA_Manual_uni_de_RZ.indd 19 02 .0 8.2 00 7 1 0:3 9:4 1 U hr 02.08.2007 10:39:41 Uhr