Profoon Telecommunicatie TX-230 - Manual (Page 23)

DECLARATION OF NETWORKCOMPATIBILITY
The Profoon TX-230 is designed for use on the ‘public switched
telephone networks (analogue single-line)’ of telephone- and cable-
companies inside the EU.
Each country and/or provider might require a different telephone-
plug.
The Profoon TX-230 complies with the essential requirements and
provisions as described in the European Directive 1999/5/EC.
The function Caller-ID is based on both the DTMF and the FSK
system (automatic detection). It might be possible that you have to
subscribe to this feature.
DECLARATION OF CONFORMITY
The declaration of conformity is available on the website
WWW.PROFOON.COM
Attention:
The display is powered by 4 pcs battery, 1.5 Volt, size AAA. Refer
to page 22 how to install these batteries. At wish you may also
connect a 9V DC power adaptor (PROFOON PCI-A9).
INTRODUCTION
The Profoon TX-230 is a telephone with built-in Caller-ID: the name
(when supported by the provider or when stored in the memory)
and the number of the person who is calling to you, comes on the
display of your telephone.
The Caller-ID memory has a capacity of 80 calls, including the time
and date of the call.
The Caller-ID is linked with the dialer of the telephone. Any inco-
ming call can be called back.
The TX-230 has a phonebook-memory of 80 names with telepho-
nenumber.
23
GB