Pioneer XDV-P6 - Manual (Page 29)

Listening to a CD
These are the basic steps necessary to play a
CD with your DVD player. More advanced CD
operation is explained starting on the next
page.
1 To select a desired disc press one of the
1
–6 buttons on the DVD player.
Playback starts.
# The indicator of selectable disc holders light
in blue. If a disc is not inserted, you cannot select
that disc holder.
# Each of the disc holders has corresponding
indicator. About the indicator status, refer to
Loading a disc on page 15.
# You can also select a disc by pressing a or b
(
DISC).
# This unit does not automatically change discs
even if it reaches to the end of the currently play-
ing disc. To change discs, press one of the
1
–6
buttons on the DVD player or a/b (DISC).
2 To skip back or forward to another
track, press o or p.
Pressing p skips to the start of the next
track. Pressing o once skips to the start of
the current track. Pressing it again will skip to
the previous track.
3 To perform fast forward or reverse,
press and hold m or n.
If you continue pressing m or n, the icon
m/n is displayed. To resume playback at a
desired point, release m/n.
# There is no sound on fast forward or reverse.
Note
When playing discs with MP3/WMA files and
audio data (CD-DA) such as CD-EXTRA and
MIXED-MODE CDs, both types can be played only
by switching mode between MP3/WMA and CD-
DA by pressing
MEDIA. This function can be op-
erated only when the disc is playing.
Stopping playback
% Press g.
# When you stop CD playback by pressing g,
that location on the disc is memorized enabling
playback from that point when you play the disc
again.
# To play back the disc again, press f.
Pausing CD playback
Pause lets you temporarily stop disc playback.
% Press f during playback.
The icon e appears in the display. Play of the
current track pauses.
# To resume playback at the same point that you
turned pause on, press f again.
Playing CDs
En
29
Section
08
Playing
CDs